Home > Articles > All Issues > 2026 > Volume 15, No. 6, 2026 >
IJMERR 2026 Vol.15(6):557-564
doi: 10.18178/ijmerr.15.6.557-564

Precision and Accuracy Measurement of a Leaf Spring Arm for Mobile Robots

Yun-Ju Chuang 1,* , Qinxin Zhan 2, Ho Chang 3,4, Yin-Tung Sun 1, and Tsing-Tshih Tsung 1
1. Department of Mechanical Engineering, Minghsin University of Science and Technology (MUST), Taiwan
2. College of Mechanical and Electrical Engineering, National Taipei University of Technology (NTUT), Taiwan
3. Ph.D Program in Semiconductor Technology, Minghsin University of Science and Technology (MUST), Taiwan
4. Innovation Frontier Institute of Research for Science and Technology, National Taipei University of Technology (NTUT), Taiwan
Email: andy2551468@gmail.com (Y.-J.C.); q364849548@gmail.com (Q.Z.); hchang@must.edu.tw (H.C.); ytasun@must.edu.tw (Y.-T.S.); tttsung@gmail.com (T.-T.T.)
*Corresponding author

Manuscript received May 19, 2026; revised June 15, 2026; accepted August 19, 2026; published November 20, 2026

Abstract—This paper presents the design and experimental characterization of a leaf-spring mechanism developed as an extensible arm for mobile robotic platforms. The mechanism uses two oppositely oriented curved steel strips as its deployable element and uses a timing-belt transmission for extension and retraction. Two complementary experiments were conducted: a static-deformation test, which covered applied tip loads of 0–5 N and extension lengths of 100–600 mm, and ae positioning-repeatability test, which covered loads of 0–3 N and extension lengths of 100–500 mm. Static deformation was determined from arm-tip height differences, while positioning repeatability was evaluated from repeated laser-spot markings on a target plane. Ten trials were performed for each tested condition. The results showed that static deformation increased with extension length and generally increased with applied load. The dispersion of the laser-spot markings also tended to increase at longer extensions. These findings characterize the loadand extension-dependent behavior of the proposed mechanism and provide an experimental basis for the subsequent refinement of long-stroke compliant robotic arms.

Keywords—leaf-spring mechanism, extensible arm, static deformation, positioning repeatability, mobile robotic platforms

Cite: Yun-Ju Chuang, Qinxin Zhan, Ho Chang, Yin-Tung Sun, and Tsing-Tshih Tsung, "Precision and Accuracy Measurement of a Leaf Spring Arm for Mobile Robots," International Journal of Mechanical Engineering and Robotics Research, Vol. 15, No. 6, pp. 557-564, 2026. doi: 10.18178/ijmerr.15.6.557-564

Copyright © 2026 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).