Impact Factor 2025:
0.9
CiteScore 2025:
SJR 2025:
Prof Richard (Chunhui) Yang
Prof Richard Yang is the Interim Dean, School of Engineering, Director, Centre for Advanced Manufacturing Technology and Head of Discipline, Mechanical and Mechtronic Engineering, Faculty of Engineering, Computing and Science, Western Sydney University. His research fields include Mechanical Engineering, Manufacturing Engineering, advanced Manufacturing, Additive Manufacturing/3D Printing, Digital Twin, Industry 4.0, Mechanical Design, Engineering Numerical Methods, Multiscale Modelling Techniques, etc.
2026-10-23
2026-08-17
2026-06-18
Manuscript received November 18, 2023; revised December 2, 2023; accepted December 27, 2023; published April 16, 2024.
Abstract—Singularity has become a limitation to the expected diversification of industrial robot applications in production. Here, we propose a novel solution for the inverse kinematics of a 6-DOF manipulator that suppresses rapid joint rotation when passing through a singularity. The proposed method is based on the optimization of the inverse Jacobi cofactor matrix utilized in the inverse kinematics calculation. By optimizing only the elements related to the four and six joints of the cofactor matrix in the inverse matrix, we were able to suppress the divergence of the joint velocities and achieve smooth robot motion when the robot entered a singular posture at the wrist. The developed system application range and tuning gain that minimize the position and orientation error were also determined. Hence, the position and orientation errors were improved by approximately 76%, and rapid rotation of the joints was almost completely suppressed. The method did not require consideration of tools attached to the hand tip, and the hand tip position, orientation, and velocity were all maintained.Keywords—industrial robot, singularity, cofactor matrixCite: Ayumu Takeuchi, Daiki Kato, Masataka Sekioka, Toshiki Hirogaki, and Eiichi Aoyama, "Study on Singularity Passing Method for Large Industrial Robot Based on Proper Element Improvement of Inverse Matrix," International Journal of Mechanical Engineering and Robotics Research, Vol. 13, No. 2, pp. 278-283, 2024.Copyright © 2024 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.