Home > Published Issues > 2014 > Volume 3, No. 3, July 2014 >

Dry Sliding Wear Behaviourof Titanium Carbide with Copper Composites

Aadarsh Mishra
Department of Mechanical Engineering,Manipal Institute of Technology, Manipal University, Manipal, Karnataka 576104, India

Abstract—Ti and C powders are milled together,and then mixed with Cu powders.The microstructures of specimens were analyzed withXRD, SEM and TEM. The pin-disk wear test was carried. It was found that TiC reinforcement formed in sintering by direct reaction in themethod. All the composites exhibit good wear resistance at 150 N normal load.

Index Terms—Wear behaviors, Mechanical alloying

Cite: Aadarsh Mishra, "Dry Sliding Wear Behaviourof Titanium Carbide with Copper Composites," International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No. 3, pp. 607-610, July 2014.