Home > Articles > All Issues > 2021 > Volume 10, No. 1, January 2021 >

Design and Technological Features of 3D-Printing Usage in Agricultural Machines Gearings Repair

Eugene O. Podchasov
Department of robotics and complex automation, BMSTU, Russia

Abstract—The repair of agricultural machines and its gearing drives is a an important challenge. Normally, a wide range of machine tools are required for gear replacement manufacturing, which is hard to provide at repair shops of farm garages. The way to temporary replace broken metal gear for 3d printed polymeric one is proposed. The usage of Novikov gearings and arch-tooth gearing instead of traditional involute cylindrical gears is offered. Estimation of accuracy of such a gearing is offered and results of experimental evaluation are given.

Index Terms— gearing, drive, 3d printing, agricultural machines, repair, gear ratio, Novikov gear

Cite: Eugene O. Podchasov, "Design and Technological Features of 3D-Printing Usage in Agricultural Machines Gearings Repair," International Journal of Mechanical Engineering and Robotics Research, Vol. 10, No. 1, pp. 32-37, January 2021. DOI: 10.18178/ijmerr.10.1.32-37

​Copyright © 2021 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.

PREVIOUS PAPER
Fault Classification and Diagnosis of UAV motor Based on Estimated Nonlinear Parameter of Steady-State Model
NEXT PAPER
Solution of the Problem about Speeds and Special Positions of Spherical Parallel Manipulator