Volume 3, No. 3, July 2014

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian R. McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Oxidation Wear Mechanism of Cast Steels

Aadarsh Mishra
Department of Mechanical Engineering, Manipal Institute of Technology, Manipal University, Manipal, Karnataka 576104, India

Abstract—The pin-on-disk wear tests were performed in elevated temperature air at 350 ºC for cast steel with different composition. Morphology, structureand oxidation films were measured by using XRD, SEM and TEM.The mechanism of wear was thus clarified. Under elevated temperature air at 350 ºC, typical oxidation wear was presented in the cast steels. Duringsliding oxidation of worn surface takes place. The oxide film formed is one of the main factor in determining wear rate which correlates with Quinn’s oxidation wear theory

Index Terms—Oxidation wear, Mechanism, Oxide film, Cast steel, Microstructure

Cite: Aadarsh Mishra, "Oxidation Wear Mechanism of Cast Steels," International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No. 3, pp. 588-592, July 2014.