Professor of School of Engineering, Design and Built Environment, Western Sydney University, Australia. His research interests cover Industry 4.0, Additive Manufacturing, Advanced Engineering Materials and Structures (Metals and Composites), Multi-scale Modelling of Materials and Structures, Metal Forming and Metal Surface Treatment.
Abstract—Engine downsizing allows automotive manufactures to achieve improved efficiency and reduce emissions. Turbocharging can increase the power density of the engine, and therefore plays a vital role in downsizing. Due to the nature of the reciprocating engine, a turbocharger turbine operates in a highly unsteady environment. This paper presents a computational investigation looking at the impact of pulse shape on the performance of a mixed flow turbine for turbocharger applications. While the impact of pulse frequency and amplitude on turbine unsteady performance has received significant attention in the past, little work has been done on the impact of the pulse shape. In the current study, four inlet pulse shapes have been investigated and shown to have a significant impact on turbine instantaneous performance, where efficiency and mass flow hysteresis varied significantly between test cases. This result shows for in-depth analyses of turbine flow physics and loss mechanisms, accurately modelling the inlet pulse shape is vital. The square pulse showed the most distinct impact with normalized cycle average efficiency decreasing by 1.37% and a 2.23% reduction in normalized stage MFP when compared to the sinusoidal wave. The variation in normalized cycle averaged stage efficiency was found to be less than 0.25% for the remaining three wave forms and the variation in normalized cycle averaged MFP less than 0.5%. This finding suggests that a simple sinusoidal wave form can be used for the majority of cycle-averaged performance comparisons.
Index Terms—pulsalting turbine flow, CFD, pulse shape
Cite: S. P. Lee, A. Rezk, M. L. Jupp, and A. K. Nickson, "The Influence of Pulse Shape on the Performance of a Mixed Flow Turbine for Turbocharger Applications," International Journal of Mechanical Engineering and Robotics Research, Vol. 7, No. 2, pp. 136-142, March 2018. DOI: 10.18178/ijmerr.7.2.136-142
Copyright © 2015-2024 International Journal of Mechanical Engineering and Robotics Research, All Rights Reserved