Home > Articles > All Issues > 2020 > Volume 9, No. 4, April 2020 >

Increase the Accuracy of Automated Control for Technical Measurements

Maria E. Limorenko and Arina D. Terenteva
Department of Robotics and Complex Automation, Bauman Moscow State Technical University, Moscow, Russian Federation

Abstract— Multiple measurements plays important role in systems of continuous control. As its result multiple measurements the selections of values containing biases are gained. Such biases by their kind is divided for random and systematical. The last one in their turn also contains different types.

For refinement of measurement results systematical part of instrumental biases should be avoided. For solving this problem method of process stabilization estimation by dimensionless criteria is offered.
Because of easy mathematical realization such an algorithm may be used for measurement automation and its usage allows to optimize measurement numbers and to lower manufacturing time for production. 
 
Index Terms— technical measurement, precision, control automation, consecutive analysis

Cite: Maria E. Limorenko and Arina D. Terenteva, "Increase the Accuracy of Automated Control for Technical Measurements" International Journal of Mechanical Engineering and Robotics Research, Vol. 9, No. 4, pp. 592-595, April 2020. DOI: 10.18178/ijmerr.9.4.592-595

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.

Previous paper
Design and Analysis on Performance of Chiller Barrel
Next paper
A Resource Management Problem under Different Assignment Rules in Cross Docks