Senior scholars and distinguished researchers are welcome to join Editorial Board of IJMERR and help organize Specil Issue on hot topics of mechanical engineering and robotics research. To propose a Special Issue, please contact us at ijmerr@ejournal.net

A Determination of Optimal Work-piece Feed Rate on Double Spray Booths to an Oven

Nattipa Yampien, Suksan Prombangpong, and Pongsak Tuengsook
Department of Production Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi (KMUTT), Bangkok 10140, Thailand
Abstract—One of the important processes in cookware manufacturing is a coating process where coating material is sprayed to cover an interior and/or exterior surfaces of a product. Then, the wet coated product must be baked in the oven at a certain temperature profile to dry the wet coated surface. Normally, the spray and baking processes are continuously connected and loading should be balanced. Due to the fact that coating process is faster than that of baking process. Thus, double spray booths are designed to feed the oven. However, if the feeding rate is not optimized, the oven capacity tends not to be fully utilized. This is due to the fact that cookware product is designed in different sizes and shape. The mixed work-pieces are simultaneously coated and baked. Therefore, a feeding pattern and optimal feed rate must be determined to match with oven capacity in order to maximize its capacity. Thus, the objective of this paper is to reveal detailed calculation and its result to achieve this goal and it can be an example for other similar applications.

Index Terms—Feed rate, optimization, oven capacity, spray coating

Cite:Nattipa Yampien, Suksan Prombangpong, and Pongsak Tuengsook, "A Determination of Optimal Work-piece Feed Rate on Double Spray Booths to an Oven," International Journal of Mechanical Engineering and Robotics Research, Vol. 6, No. 5, pp. 401-405, September 2017. DOI: 10.18178/ijmerr.6.5.401-405
Copyright © 2016-2017 International Journal of Mechanical Engineering and Robotics Research, All Rights Reserved
E-mail: ijmerr@ejournal.net