LabVIEW Implementation of Tuning PID Controller Using Advanced Control Optimization Techniques for Micro-robotics System

General Information

ISSN: 2278-0149 (Online)
Abbreviated Title: Int. J. Mech. Eng. Robot. Res.
Frequency: Bimonthly
DOI: 10.18178/ijmerr
Managing Editor: Ms. Jennifer Zeng
Abstracting/Indexing: Scopus, CNKI, Google Scholar, Crossref, etc.
E-mail questions to IJMERR Editorial Office.
Acceptance Rate: 24%
APC: 450 USD
Average Days to Accept: 118 days
Journal Metrics:

1.8

2022CiteScore

36th percentile

Editor-in-Chief

Prof Richard (Chunhui) Yang

Professor of School of Engineering, Design and Built Environment, Western Sydney University, Australia. His research interests cover Industry 4.0, Additive Manufacturing, Advanced Engineering Materials and Structures (Metals and Composites), Multi-scale Modelling of Materials and Structures, Metal Forming and Metal Surface Treatment.

What's New

2024-02-24

Volume 13, No. 1 has been published online.

2024-01-04

IJMERR will adopt Article-by-Article Work Flow. For the Bimonthly journal, each issue will be released at the end of the issue month.

2023-11-02

November 2nd, 2023 News! Volume 12, No. 6 has been published online

Home > Published Issues > 2022 > Volume 11, No. 9, September 2022 >

IJMERR 2022 Vol.11(9): 653-661
DOI: 10.18178/ijmerr.11.9.653-661

Ehab Seif Ghith and Farid Abdel Aziz Tolba

Faculty of Engineering, Ain shams University, Cairo, Egypt

Abstract—Microparticles have the potentials to be used for many medical purposes in-side the human body such as drug delivery and other operations. This paper attempts to provide a thorough comparison between eight meta-heuristic search algorithms: Sparrow Search Algorithm (SSA), Flower Pollination Algorithm (FPA), Slime Mould Algorithm (SMA), Marine Predator Algorithm (MPA), Multi-Verse Optimizer (MVO) Grey Wolf Optimization (GWO), Sine-Cosine Algorithm (SCA), and Whale Optimization Algorithm (WOA). These approaches were used to calculate the PID controller optimal indicators with the application of different functions, including Integral Absolute Error (IAE), Integral of Time Multiplied by Square Error (ITSE), Integral Square Time multiplied square Error (ISTES), Integral Square Error (ISE), Integral of Square Time multiplied by square Error ( (ISTSE), and Integral of Time multiplied by Absolute Error (ITAE). Every method of controlling was presented in a MATLAB Simulink numerical model, and LABVIEW software was used to run the experimental tests. . It is observed that the GWO technique achieves the highest values of settling error for both simulation and experimental results among other control approaches, while the SSA approach reduces the settling error by 50% compared to former experiments. The results indicate that SSA is the best method among all approaches and that ISTES is the best choice of PID for optimizing the controlling parameters.

Index Terms—PID controller, whale optimization Algorithm, flower pollination algorithm, grey wolf optimization, sine-cosine algorithm, sparrow Search Algorithm, slime mould algorithm, marine predator algorithm, multi-verse optimizer, minimally invasive surgery

Cite: Ehab Seif Ghith and Farid Abdel Aziz Tolba, "LabVIEW Implementation of Tuning PID Controller Using Advanced Control Optimization Techniques for Micro-robotics System," International Journal of Mechanical Engineering and Robotics Research, Vol. 11, No. 9, pp. 653-661, September 2022. DOI: 10.18178/ijmerr.11.9.653-661

Copyright © 2022 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.