Home > Published Issues > 2017 > Volume 6, No. 3, May 2017 >

Development DKMQ Shell Element with Five Degrees of Freedom per Nodal

Herry Irpanni, Irwan Katili, and Imam J. Maknun
Civil Engineering Department Universitas Indonesia Depok, Indonesia

Abstract—In this paper we develop element DKMQ five Degrees of Freedom (DOF) per nodal with curvilinear approach. The advantage of this element that it is not required fictitious rigidity and can be used to analyze thick and thin structural problem without shear locking. As numerical result, DKMQ five DOF are able to give good performance. 
 
Index Terms—DKMQ, five DOF, convergence test

Cite: Herry Irpanni, Irwan Katili, and Imam J. Maknun, "Development DKMQ Shell Element with Five Degrees of Freedom per Nodal," International Journal of Mechanical Engineering and Robotics Research, Vol. 6, No. 3, pp. 248-252, May 2017. DOI: 10.18178/ijmerr.6.3.248-252

PREVIOUS PAPER
Modelling of Dapped-End Beams under Dynamic Loading
NEXT PAPER
Development of Simplified Wearable Wrist Rehabilitation Device Using Low-Friction Type Flexible Pneumatic Cylinders