DQM Application on Classical Problem “Stagnation Point Flow”

Cemre Melike Pehlivan 1, Melih Fidanoğlu 1, Güven Kömürgöz 2, and İbrahim Özkol 1
1. Faculty of Aeronautics and Astronautics ITU, Istanbul, Turkey
2. Faculty of Electrical and Electronical Engineering, ITU, Istanbul Turkey
Abstract—In this study, a classical problem stagnation point flow was revisited by using powerfull enough semi numerical analytical technique DQM. A general expression of stagnation point flow is obtained. This equation solved with differential quadrature method (DQM) and Galerkin method. It is seen that obtained results are very closed to each other. But using DQM is more practical and faster than Galerkin. Because polynomial fitting in Galerkin method requires much more time than DQM
 
Index Terms—component; stagnation point flow, differential quadrature method, galerkin method

Cite: Cemre Melike Pehlivan, Melih Fidanoğlu, Güven Kömürgöz, and İbrahim Özkol, "DQM Application on Classical Problem “Stagnation Point Flow”," International Journal of Mechanical Engineering and Robotics Research, Vol. 6, No. 1, pp. 50-53, January 2017. DOI: 10.18178/ijmerr.6.1.50-53
Copyright © 2016-2017 International Journal of Mechanical Engineering and Robotics Research, All Rights Reserved
E-mail: ijmerr@ejournal.net