Technology of WAVE and Feature Cutter Volume of Manufacturing

Liu Jialiang, Chen Zhuoning, Xu Tongming, and Zhang Fen
Huzhong University of Science and Technology, in Wuhan, China
Abstract—A forward and automatic method for in-process model generation is proposed and integrated with three-dimensional computer aided process planning (CAPP) system. The method based on feature cutter volume of manufacturing drives the in-process model to evolve from blank to part, which is coincident with the manufacturing process and ideology of process design. At the same time, technology of What-if Alternative Value Engineering (WAVE) is implanted in the generation to establish the relationship of in-process models, which supports function of the automatic update for models. The paper introduces a theory of the solution to demonstrate the connection between manufacture feature and feature cutter volume, and detailedly presents the technological process in applying the WAVE technology. Examples are completed in a commercial CAPP system to illustrate the feasibility of this approach.
 
Index Terms—CAPP, in-process model, manufacture feature, UG/WAVE, automatic annotation

Cite: Liu Jialiang, Chen Zhuoning, Xu Tongming, and Zhang Fen, "Technology of WAVE and Feature Cutter Volume of Manufacturing," International Journal of Mechanical Engineering and Robotics Research, Vol. 5, No. 3, pp. 210-216, July 2016. DOI: 10.18178/ijmerr.5.3.210-216
Copyright © 2016-2017 International Journal of Mechanical Engineering and Robotics Research, All Rights Reserved
E-mail: ijmerr@ejournal.net