Volume 4, No. 2, April 2015

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian R. McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Fatigue Analysis of Polymer Composite Deep Drawing Die

V Hari Sankar1 , V Ravi Kumar1, and N V S Shankar2
1.Mechanical Engineering Department, ASR College of Engineering, Tanuku, India.
2.Mechanical Engineering Department, GITAM University, Visakhapatnam, AP, India.

Abstract—Short run production are the current scenario for batch production is of growing importance. When considering metal forming processes in this scenario, die and punch costs play an important role making the processes costlier. Polymer composite material, Renshape 5166 dies made by rapid tooling techniques prove to be good solution in this scenario. Fatigue life estimation of the dies help in planning for the production. FE simulations are carried out to predict the fatigue life of these dies during deep drawing process. The results of the simulation indicate that these dies can be used or softer material like aluminum for 1000 cycles, but when stronger materials like Cu or SS are used, the life is limited to around 100 cycles.

Index Terms—Rapid tooling, Polymer composite die, Transient simulation, Fatigue life

Cite: V Hari Sankar, V Ravi Kumar, and N V S Shankar, "Fatigue Analysis of Polymer Composite Deep Drawing Die," International Journal of Mechanical Engineering and Robotics Research, Vol.4, No. 2, pp. 22-29, April 2015.