Home > Published Issues > 2014 > Volume 3, No. 2, April 2014 >

Design of Experimental Setup for Producing Stud Bolt in Circular Rolling Machine

K Chellamuthu1 , T Dharun kumar2, and R Sanjeevi2
1.Assistant Professor, Department of Mechanical Engineering K.Ramakrishnan College of Engineering College, Trichy.
2.UG Scholars, Department of Mechanical Engineering, K.Ramakrishnan College of Engineering College, Trichy

Abstract— Normally in circular rolling machine, the stud bolt is threaded in one side at a time. In order to improve the production cycle of circular rolling machine, we are going to redesign the existing die setup, in which simultaneously to make thread in both sides of stud bolt. The stud bolt to be manufactured has two varying shank diameter, which cannot be balanced while threading operation in normal machine setup. So this new experimental setup gives a balanced rolling operation and hence improves productivity of the machine in making stud bolt.

Index Terms— Die setup, Circular rolling machine, Stud bolt, Productivity.

Cite: K Chellamuthu, T Dharun kumar, and R Sanjeevi, " Design of Experimental Setup for Producing Stud Bolt in Circular Rolling Machine," International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No. 2, pp. 282-288, April 2014.