Home > Published Issues > 2014 > Volume 3, No. 2, April 2014 >

Energy Radiated in Steel Plant by Attached Furnace and Casting Media by Pipe Arrangement

M S Dhande1 and S S Khandare2
1.Mechanical Engineering Department, PIET, Nagpur 34, India.
2.V. M. Institute of Technology, Wardha Road, Nagpur, India.

Abstract— Heat energy loss is the very critical issue in the world and second heavy quantity of heat energy is to be loss in steel industry. In steel plant more quantity of energy is required but still the loss of energy is going on. We tried to reduce the loss by applying the suitable technique. In the every steel plant open system is used. Suppose move towords countinuous casting process there is an open casting process goes on. If apply close packing system, and inside this make a casting work, we will get the energy save. Transportation of ingots from one shop to another shop in this case heat loss at very high percentage and ingots has to be cold down.When has the rolled purpose; again we have to keep these raw material inference and rolled. In this way the loss of energy go on and this can be controlled by making all opration in single unit. In steel plant lots of sections are spread in different places, there is no coordination among each other.

Index Terms— Steel plant, Furnace, Heat Energy, Pipe

Cite: M S Dhande and S S Khandare, " Energy Radiated in Steel Plant by Attached Furnace and Casting Media by Pipe Arrangement," International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No. 2, pp. 188-194, April 2014.