Home > Published Issues > 2015 > Volume 4, No. 1, January 2015 >

Fault Tree Analysis of Magnetorhological Brake

Bhau K Kumbhar1, Sonal V Patil1, Satyajit R Patil2, and Suresh M Sawant3
1.Mechanical Engineering Department, Gharda Institute of Technology, Khed (MH), India
2.Automobile Engineering Department, Rajarambapu Institute of Technology, Sangli (MH), India
3.Mechanical Engineering Department, Rajarambapu Institute of Technology, Sangli (MH), India

Abstract—To improve the reliability of any system, many tools have been introduced which will increase its possibility to satisfy the application requirements. In this work, an attempt has been made to carry out the Fault Tree Analysis (FTA) of Magneto-Rheological (MR) brake to ensure its effectiveness. The Fault tree analysis is a logical, graphical diagram that describes failure modes and causes. The FTA diagram graphically shows all failures for a system, subsystem, assembly, Printed Circuit Board (PCB), or module. The output from the FTA provides a better understanding of the causes that can lead to a failure mode.

Index Terms—Magneto-Rheological (MR) Brake, Reliability, Fault Tree Analysis (FTA), Failure modes and causes, Recommendations

Cite: Bhau K Kumbhar, Sonal V Patil, Satyajit R Patil, and Suresh M Sawant, "Fault Tree Analysis of Magnetorhological Brake," International Journal of Mechanical Engineering and Robotics Research, Vol. 4, No. 1, pp. 202-215, January 2015.

PREVIOUS PAPER
Study and Performance Analysis of Gas Turbine Combustion Chamber and Improving Combustion Efficiency by Using Ceramic Composite Material Coating
NEXT PAPER
Gas Turbines Blades-A Critical Review of Failure on First and Second Stages