Volume 3, No. 3, July 2014

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Design & Analysis of Connecting Rod of Forming and Cutting Die Pillar Station of Vacuum Forming Machine

C P Gaikwad1 and S D Kalpande2
1.Mechanical Engineering Department, MET Institute of Engineering & Research, Nasik, India
2.Mechanical Engineering, MET Institute of Engineering & Research, Nasik, India

Abstract—The objective of this work is to design and analyze the performance of connecting rod, through a simple experimental model of Forming and Cutting Die Station of Vacuum Forming Machine. A connecting rod is a machine member subjected to alternating direct compressive and tensile forces, compressive forces are generally more in connecting rods so it is considered for its prime safety. A parametric mathematical model of connecting rod is modeled using Pro-E Wildfire 4.0 Software and its Static Structural Analysis is carried on Ansys v-11.0 Workbench. FEA of connecting rod is done using C50 as its base material to determine its von-Mises stress, Max shear Stress, Total Deformation and Alternating stress to cycles graph. Also the Stiffness of connecting rod is calculated

Index Terms—Connecting rod, Vaccum forming, Ansys, FEA, Compressive, Design

Cite: C P Gaikwad and S D Kalpande, "Design & Analysis of Connecting Rod of Forming and Cutting Die Pillar Station of Vacuum Forming Machine," International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No. 3, pp. 103-108, July 2014.