Volume 2, No. 3, July 2013

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian R. McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Computer Aided Analysis and Design of Hoisting Mechanism of an EOT Crane

Shyam Lal Sharma1 , Tasmeem Ahmad Khan1, Md. Parvez1, and Kamlesh Kumari2
1.Department of Mechanical Engineering, Al Falah School of Engineering and Technology, Fbd, Hr.
2.Mechanical Design Engineer, Desein & Indure Pvt. Limited, New Delhi

Abstract—In this project an overall design the hoists generally confirm to IS: 3177 of the hoisting mechanism of an EOT crane has been carried out. The dimensions of the main components have been determined for a load capacity of 50 ton crane having 8 rope falls. Various dimensions for cross sections of various shapes for crane have been found. After the system was designed, the stress and deflection are calculated at critical points using ANSYS and optimized. Which cross section would be better keeping some parameters constant for all the case .Various dimensions and load per wire for wire ropes has been found. Using various formulae found the dimensions for pulley, Rope-drum. Also calculated the Power and ratings for the motor brakes used in the hoist mechanism.

Index Terms—Single girder electrical overhead traveling crane in cross travel and long travel, Hoisting mechanism, No. of falls, Computer aided design, ANSYS and optimization, Pulley, Rope-drum, Hook block, Motor brakes

Cite: Shyam Lal Sharma, Tasmeem Ahmad Khan, Md. Parvez and Kamlesh Kumari, "Computer Aided Analysis and Design of Hoisting Mechanism of an EOT Crane," International Journal of Mechanical Engineering and Robotics Research, Vol.2 No.3, pp. 89-95, July 2013.