Volume 1, No. 3, October 2012

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Modelling and Analysis of Alloy Wheel for Four Wheeler Vehicle

S Vikranth Deepak , C Naresh, and Syed Altaf Hussain
School of Mechanical Engineering, RGM College of Engineering & Technology, Nandyal 518501, India.

Abstract—Alloy wheels are automobile wheels which are made from an alloy of aluminum or magnesium metals Or sometimes a mixture of both. Alloy wheels differ from normal steel wheels because of their lighter weight, which improves the steering and the speed of the car. Alloy wheels will reduce the unstrung weight of a vehicle compared to one fitted with standard steel wheels. The benefit of reduced unstrung weight is more precise steering as well as a nominal reduction in fuel consumption. Alloy is an excellent conductor of heat, improving heat dissipation from the brakes, reducing the risk of brake failure under demanding driving conditions. At present four wheeler wheels are made of Aluminum Alloys. In this project, Aluminum alloy are comparing with other Alloy. In this project a parametric model is designed for Alloy wheel used in four wheeler by collecting data from reverse engineering process from existing model. Design is evaluated by analyzing the model by taking the constraints as ultimate stresses and variables as two different alloy materials and different loads and goals as maximum outer diameter of the wheel and fitting accessories areas like shaft of the axle and bolts PCD of the car. Car model is Ford Fiesta.

Index Terms—Alloy wheel, Static analysis, Fatigue analysis, Model analysis, Aluminum alloy, Magnesium alloy, Zinc alloy

Cite: S Vikranth Deepak, C Naresh, and Syed Altaf Hussain, "Modelling and Analysis of Alloy Wheel for Four Wheeler Vehicle," International Journal of Mechanical Engineering and Robotics Research, Vol.1, No.3, pp. 72-80, October 2012.