Volume 2, No. 1, January 2013

General Information

  • ISSN: 2278-0149 (Online)
  • Abbreviated Title:  Int. J. Mech. Eng. Robot. Res.  
  • Editor-in-Chief: ​Prof Richard (Chunhui) Yang, Western Sydney University, Australia
  • Associate Editor: Prof. B.V. Appa Rao, Andhra University; Prof. Ian R. McAndrew, Capitol Technology University, USA
  • Managing Editor: Murali Krishna. B
  • DOI: 10.18178/ijmerr
  • Abstracting/Indexing: Scopus (since 2016), CNKI, Google Scholar, Crossref, etc.
  • E-mail questions to IJMERR Editorial Office.

Submissions

Please send your full manuscript to:

ijmerr@vip.163.com


Useful Documents

Paper Template

Copyright Transfer Agreement

Application For Reviewers

Contact us

International Journal of Mechanical Engineering and Robotics Research
E-mail: ijmerr@vip.163.com

Design, Manufacture and Simulate a Hydraulic Bending Press

Manar Abd Elhakim Eltantawie
Higher Technological Institute, 3rd District, 7th Zone, 6th of October, P.O. Box 4-6th of October City, Giza, Egypt.

Abstract—A small hydraulic press for V-bending operation is designed, manufactured and modeled. The hydraulic bending press consists of hydraulic circuit, punch, die and PLC control unit. Automation studio and SimHydraulic in Matlab/Simulink library are used to model the hydraulic circuit. Using PLC program, the bending operation is controlled. The press had to be capable of withstanding 2 tons of force. The punch and dies are designed to be rigidly fixed and easily removable, changeable to any kind of forming operation with decreasing of spring back effect of the sheet metal.

Index Terms—Hydraulic circuit, Bending press, SimHydraulic, Spring-back, PLC

Cite: Manar Abd Elhakim Eltantawie, "Design, Manufacture and Simulate a Hydraulic Bending Press," International Journal of Mechanical Engineering and Robotics Research, Vol.2, No. 1, pp. 1-9, January 2013.