Home > Published Issues > 2019 > Volume 8, No. 3, May 2019 >
Volume 8, No. 3, May 2019
Download content pdf
Article# Article Title & Authors (Volume 8, No. 3, May 2019) Page
1
Experimental Investigation of Phase-Separation Effectiveness of Combined Impacting Tee Junctions
Samina Noor and Hassan M. Soliman
 333
2
Modal Dynamic Analysis of a Synchronizer Mechanism: A Numerical Study
A. Farokhi Nejad, G. Chiandussi, A. Moshrefzadeh, V. Solimine, A. Serra, and E. Rulfi
 340
3
Geometrical Parameters and Foam Filling Effect of Aluminium Thin-Walled Tubes under Axial and Oblique Loading
Fauziah Mat, Khairul Azwan Ismail and Masniezam Ahmad
 347
4
Feed Rate Determination Method for Tool Path Interpolation Considering Piecewise-Continued Machining Segments with Cornering Errors and Kinematic Constraints
Syh-Shiuh Yeh
 354
5
The Influence of the Variable Excitation Wavelength on the Spectral Characteristics of the Light Generated by the Luminescent Layer Consisting of YAG: Ce Phosphor and PDMS
Jan Jargus, Jan Nedoma, Marcel Fajkus, Jan Vitasek, Radek Martinek, Vladimir Vasinek
 361
6
Puncture Impact Performance of Coir-Aramid/Epoxy Hybrid Composite: Effects of Stacking Configurations
Azrin Hani Abdul Rashid, Siti Nor Hafiza Mohamad, Khairani Nasir, Muhammad Farid Shaari, Mohd Nazrul Roslan, Noraini Marsi, Siti Hana Nasir, Mohd Faizal Esa, Salwa Mahmood
 368
7
Analyses Corrosion Prediction Software for CO2 Corrosion of Carbon Steel Using Statistical Formulas
Y. P. Asmara, A. G. E. Sutjipto, J. P. Siregar, T. Kurniawan, Jamiluddin Jaafar
 374
8
Simulation and Analysis on Temperature Field of Bearingless High Speed Motorized Spindle
Jie Meng, Gaofa He, Guichuan Hu and Shuang Liu
 380
9
CFD Analysis for the Performance of Gurney Flap on Aerofoil and Vertical Axis Turbine
Yan Yan, Eldad Avital, John Williams, and Theodosios Korakianitis
 385
10
Rule-Based Approach for Constrained Motion Control of a Teleoperated Robot Arm in a Dynamic Environment
Marie Claire Capolei, Haiyan Wu, Adrian Llopart M., Silvia Tolu, Ole Ravn
 393
11
Performance Analysis of Position Tracking Control with PID Controller using an Improved Optimization Technique
Chai Mau Shern, Rozaimi Ghazali, Chong Shin Horng, Hazriq Izzuan Jaafar, Chong Chee Soon, Yahaya Md Sam
 401
12
On the Use of Tuned Mass Dampers for Reducing the Nonlinear Vibrations of Planar Parallel Cable Robots
Diego A. Zamora-García, Alejandro C. Ramirez-Reivich, Ma. Pilar Corona-Lira, Jonathan Eden, and Denny Oetomo
 406
13
The Flow Characteristics in Early Stages of the Close Tandem Symmetrical Airfoils
Yoshifumi Yokoi
 413
14
Mass Properties Estimation of a Satellite Simulator Based on the Integration Method
Jung-Hyung Lee, Hun-Jo Lee, Joon-Yong Lee, Hwa-Suk Oh, Deok-Ki Song, Tae-Seong Song, Jeong-Min Kang, Joong-Bo Seo
 418
15
Using the Technology of Inflatable Structures for the Removal of Spacecraft’s from Low Orbits
Vsevolod V. Koryanov, Victor P. Kazakovtsev, Alexey G. Toporkov, Anton A. Nedogarok
 424
16
Estimation of Vehicle Dynamics States Using Luenberger Observer
Nguyen Van Dong, Pham Quoc Thai, Phan Minh Duc, Nguyen Viet Thuan
 430
17
Improvement of Pneumatic Chuck in Flexible Linear Stepping Actuator with Backdrivability
Nobuhiro Fukukawa, Tetsuya Akagi, Shujiro Dohta, Wataru Kobayashi and Yuya Eguchi
 437
18
Fault Ride through Capability Improvement of DFIG Using SMES Unit during Short Circuit
A. M. Shiddiq Yunus and Makmur Saini
 443
19
Potential of the Force Distribution Measurement in Deep Drawing Processes for Increasing the Process Quality
Wolfgang Zorn, Lucas Hamm, Roman Elsner, Welf-Guntram Drossel
 449
20
N/A
0
21
Modeling and Analysis of Rotary Mechanical Systems Linked Through a U-joint
Masoud SoltanRezaee, Mohammad-Reza Ghazavi, Asghar Najafi, and Wei-Hsin Liao
 459
22
Reducing Conducted Emission in EMC Measurement of Smart Street Lighting
Hardiles, Tri Desmana Rachmildha, Deny Hamdani, Wisnu Ananda, and Seto Ayom Cahyadi
 466
23
Static Analysis on the New Piston Retaining Frame of One-Stage Gasholder
Jia Dongyun, Liu Jianwen, and Gao Zhan
 472
24
Coupled Bending-Torsional Dynamic Behavior of a Cantilever Beam Carrying Multiple Point Masses
Alev Kacar Aksongur, Seher Eken, and Metin Orhan Kaya
 477
25
Robust Control Law Using H-infinity for Wheeled Inverted Pendulum Systems
Pham Tam Thanh, Dao Phuong Nam,Vu Van Tu, Tran Quang Huy, and Nguyen Van Huong
 483
26
Stress Waves in a Damaged Rod Subjected to Longitudinal Impact
Hesham A. Elkaranshawy
 488
27
Three-Dimensional Finite Element Analysis during Tightening of Bolt-Nut Connection Having Slight Pitch Difference
Nao-Aki Noda, Xi Liu, Yoshikazu Sano, Yunting Huang, and Yasushi Takase
 494